Description | Add an extra boost to your Honda Talon with the Jackson Racing Turbocharger System. This complete bolt-on kit combines with the finely tuned Honda Talon chassis to bring unrivaled performance in any terrain. The Jackson Racing turbo kit has been thoroughly tested to bring race level performance to your Talon.
– CARB EO# D-700U-8
– 60% increase in HP
– High-Efficiency Garrett Motion Turbocharger
– Jackson Racing Factory ECU Reflash including DCT Tuning
– Seamless Integration |
- Easily add a particle separator to your JR Turbo Talon
- Models for both KWT and Honda/S&B
- Does not hurt HP output
- Prolonged air filter life
|
- 98% of dirt particles stopped before reaching your filter
- Silent filtration. No power, moving parts, or wiring required.
- No HP loss
- Extends air filter life
- Compatible with JR Turbo (With Adapter)
| | | |
Content | KEY POINTS:
• CARB EO# D-700U-8
• Over 60% increase in power at 8 psi of boost
• A plug-n-play solution that feels factory
• Automotive grade reliability
SYSTEM FEATURES:
High-Efficiency Garrett Motion Turbocharger
• Developed directly with Garrett
• Uses robust components for OEM-level durability
Jackson Racing Intercooler System
• JR Spec'd Garrett Motion intercooler core
• JR CAD-designed cast aluminum end tanks
• High flow SPAL fan for maximum cooling
Jackson Racing Intake Manifold
• Cast aluminum for smooth transitions
• Even runner distribution and throttle response
Jackson Racing Stainless Steel Turbo Manifold
• TIG-welded and back purged
• Investment cast merge collector for optimized flow
Jackson Racing Air Intake System
• Developed with proven protection against particle intrusion
• Reusable, easy to clean air filter
• Mandrel bent & powder coated piping
Jackson Racing ECU Flash Tool
• Factory ECU Reflash through the OEM diagnostic port
• Precise engine tuning for proper performance and reliability
• Fully remapped DCT shift schedules optimized for turbo feel and performance
• Seamless power delivery; Factory drivability
• Minimum 91 octane (R+M/2) fuel
Jackson Racing Turbo Graphics Kit
Most Trusted Name in Aftermarket Forced Induction
• Official Honda Off-Road Racing Performance Partner
• 40+ Years of Forced Induction knowledge
• No fabrication, no welding, no engine internals
• High quality metric fasteners & hardware
• Industry leading customer service & support
• Printed installation manual | Looking to add a Particle Separator to your Jackson Racing Turbo Talon?
Engines rely on a clean and continuous air supply for proper operation. It can be even more critical on forced induction vehicles, as any restriction will rob HP. A particle separator pre filter helps ensure your filter doesn't get overloaded with silt and prolongs the life of the air filter.
We designed the particle separator adapter to work with two popular models of particle separators, KWT and Honda/S&B. Please select the adapter that matches the particle separator you own.
We use the KWT particle separators on our Jackson Racing Talons, including the Raceco Trophy Unlimited Racing Honda Talon. KWT units require no fan, electricity, or other moving parts. Using a patent pending advanced disruptive airflow technology the KWT filter quietly and efficiently removes up to 98% of particulates before the airflow reaches your filter. Even better, it has been dyno tested by us and does not hurt HP output! | The KWT X2 Particle Separator has updated innovative cyclonic technology, increased air flow, higher efficiency at removing dirt and dust particles. It comes with a larger detachable dirt collection chamber with easy access to remove dirt. The standard kit and mounting solution comes with two arm brackets and two roll bar clamps.
All Talon kits include a standard 4' of ducting. A 4" hole saw is recommended for installation.
*Standard Talon cross bar tube size is 1 3/8", while the rest of the tubing is 2". It is recommended to check size of your roll bar tube.
*If you run a rear window, the 2" universal is compatible.
Add this to your JR Turbo Talon with the Particle Separator Adapter (Not Included) | Replacement Intercooler For Jackson Racing Honda Talon Turbo Kit. | Hardware kit to mount turbo.
Kit Includes:
Chromoly Flanged Bolt - M10 X2
Chromoly Flanged Bolt - M8
Copper Flanged Lock Nut- M10 X4
Copper Flanged Lock Nut- M8
Turbo Stud - M10 X2
Wedgelock Washer - M10 X6
Wedgelock Washer - M8 X2
Copper Anti Seize | Replacement Bypass Valve For The Jackson Racing Honda Talon Turbo Kit. |
Additional information |
Weight |
75 lbs |
Dimensions |
30 × 26 × 19 in |
Year |
2019, 2020, 2021, 2022
|
Model |
2 Seat, 4 Seat
|
Vehicle ECU Type |
AC Type, A Type
|
|
Weight |
10 lbs |
Dimensions |
14 × 12 × 10 in |
Size: |
3 inch (KWT), 3.5 inch (S&B)
|
|
Weight |
9 lbs |
Dimensions |
18 × 12 × 12 in |
Roll Bar Clamp Size |
1 3/8" (Standard Talon), 2" Universal, All other sizes (Call To Order)
|
|
Weight |
10 lbs |
Dimensions |
18 × 12 × 10 in |
| |
Weight |
2 lbs |
Dimensions |
6 × 4 × 3 in |
|